Putzmeister C00178700 is a DN230 Spectacle Wear Plate designed for concrete pumping systems. Also commonly referred to as a Putzmeister DN230 Wear Plate, Spectacle Plate, or Concrete Pump Wear Plate, this component plays an important role in sealing, wear protection, and stable concrete transfer inside the hopper and S-Valve system.
For contractors, concrete pump operators, maintenance companies, and spare parts distributors, choosing the correct DN230 spectacle wear plate is essential for maintaining pumping efficiency and reducing unexpected downtime.
Putzmeister C00178700 is a DN230 Spectacle Wear Plate used in Putzmeister concrete pump systems.
The spectacle wear plate is installed inside the concrete pump hopper at the openings connected to the delivery cylinders. During concrete pumping, the wear plate works together with the wear ring/cutting ring and thrust ring to create a reliable sealing interface while resisting continuous abrasion from concrete and aggregates.
Putzmeister's spare parts documentation identifies C00178700 as the part number for a Ø230 spectacle wear plate in the relevant wear-parts system. The associated DN230 wear components include the wear ring and thrust ring.
| Item | Specification |
|---|---|
| Product Name | DN230 Spectacle Wear Plate |
| Part Number | C00178700 |
| Brand | Putzmeister |
| Size | DN230 |
| Product Type | Concrete Pump Wear Part |
| Application | Concrete Pump |
| Main System | Hopper / S-Valve System |
| Related Parts | Wear Ring, Thrust Ring, S-Valve |
The spectacle wear plate has two major functions: wear protection and sealing.
During concrete pumping, the delivery cylinders push concrete toward the hopper outlet and S-Valve. The spectacle wear plate provides the wear-resistant surface at the cylinder openings. The wear ring works against the wear plate, while the S-Valve controls the direction of concrete flow.
This arrangement allows the pumping system to maintain a relatively tight contact surface while the S-Valve changes between the two delivery cylinders.
Because concrete contains cement, sand, gravel, and other aggregates, the contact surfaces are continuously exposed to sliding wear, impact and abrasion. Putzmeister notes that wear is affected by factors such as aggregate grading, aggregate hardness, water/cement ratio, and the concrete mix.
A worn spectacle wear plate can affect the performance of the entire concrete pumping system.
Typical problems caused by excessive wear may include:
For this reason, the spectacle wear plate should not be considered an isolated component. The condition of the wear plate, wear ring, thrust ring and S-Valve should be evaluated together during maintenance.
The DN230 spectacle wear plate normally works together with a matching wear ring/cutting ring.
Putzmeister's parts documentation identifies C00178600 as a DN230 wear ring associated with the C00178700 spectacle wear plate in the relevant parts configuration. The same documentation lists 458878 as the DN230 thrust ring.
This means that when replacing a Putzmeister C00178700 DN230 Spectacle Wear Plate, it is good maintenance practice to inspect the matching wear ring and thrust ring at the same time.
If the mating surfaces are excessively worn, installing only a new wear plate may not restore the expected sealing condition.
Spectacle wear plates for concrete pumps are available in different wear-resistant configurations.
Putzmeister's official parts documentation describes different wear material options, including DURO 22 and carbide. The company explains that carbide is intended for more demanding applications where higher wear resistance and longer service life are required.
The appropriate material depends on:
For high-volume concrete pumping applications, wear-resistant carbide solutions can be particularly attractive because reducing wear-part replacement frequency can help minimize equipment downtime.
There is no single replacement interval that applies to every concrete pump because actual wear depends heavily on operating conditions.
Instead, maintenance teams should inspect the wear plate for:
A significantly worn contact surface can reduce the effectiveness of the sealing interface.
Uneven or localized wear may indicate problems with the mating wear ring, alignment, material selection, or operating conditions.
Increasing leakage around the wear plate and cutting ring area can be an important warning sign.
Cracks, chips, deformation or severe surface damage should be investigated before continuing operation.
A new wear plate should be properly matched with the condition and specification of the corresponding wear ring.
The DN230 wear plate belongs to the wear-parts system used with Ø230 pumping components.
Putzmeister's parts catalog identifies DN230/Ø230 wear components in systems including the RS907 configuration. The official catalog lists spectacle wear plate, wear ring, thrust ring and related components as part of the hopper wear-parts system.
When ordering a replacement, customers should confirm:
Part Number → C00178700
Size → DN230 / Ø230
Application → Putzmeister concrete pump
Component → Spectacle Wear Plate
This is particularly important because Putzmeister uses different spectacle wear plate specifications for different pump configurations and diameters.
Putzmeister uses different part numbers for different wear plate sizes and configurations.
For example, Putzmeister documentation identifies different spectacle wear plate part numbers for Ø200 and Ø230 systems. Therefore, customers should not select a wear plate based only on appearance.
The correct replacement should be confirmed using the:
For international spare parts purchasing, searching by the OEM number C00178700 is usually one of the most effective ways to identify the required component.
For international buyers, the most important factors are not only price but also part-number accuracy, dimensional accuracy, material quality, wear resistance, production consistency and delivery capability.
A professional supplier should be able to provide:
For distributors and concrete pump service companies, maintaining stock of frequently used wear parts can also reduce equipment downtime and improve after-sales service.
CZIC GROUP specializes in concrete pump spare parts and wear parts for international customers.
Our product range covers:
For customers looking for Putzmeister C00178700 DN230 Spectacle Wear Plate, CZIC GROUP can help confirm the part number, application and matching wear components before ordering.
Putzmeister C00178700 is a DN230 / Ø230 Spectacle Wear Plate used as a wear component in the concrete pump hopper and S-Valve system.
Common search terms include:
The DN230 wear system includes a wear ring/cutting ring and thrust ring. Putzmeister documentation associates C00178700 with the DN230 wear ring C00178600 and thrust ring 458878 in the relevant configuration.
No. The correct wear plate depends on the pump configuration and component diameter. Always confirm the OEM part number, dimensions and application before purchasing.
Replacement frequency depends on concrete mix, aggregate characteristics, pumping volume, operating conditions and wear-part material. Regular inspection is more reliable than using a fixed replacement interval.
It may be possible, but the matching wear ring/cutting ring and thrust ring should also be inspected. If the mating components are worn, replacing them together can help restore proper sealing and reduce premature wear.
Putzmeister C00178700 DN230 Spectacle Wear Plate is an important wear component in the concrete pump hopper and S-Valve system. Its primary role is to provide a durable contact and sealing surface while resisting the abrasive forces generated by continuously pumped concrete.
Selecting the correct DN230 wear plate, matching wear ring and thrust ring can help maintain pumping performance, reduce leakage and control maintenance costs.
If you are looking for Putzmeister C00178700, DN230 Spectacle Wear Plate, Putzmeister Wear Plate, or other Putzmeister concrete pump spare parts, contact CZIC GROUP for part-number confirmation and quotation.
Product: DN230 Spectacle Wear Plate
Part No.: C00178700
Brand: Putzmeister
Application: Concrete Pump
Category: Concrete Pump Wear Parts
Contact CZIC GROUP for C00178700 DN230 Spectacle Wear Plate quotation and availability.